Development Board ping to the virtual machine

development board has the ping fails, the god of online help
my virtual machine ip: 192.168.1.11 mask 255.255.255.0 gateway 192.168.85.255
pc: 192.168.1.11, mask 255.255.255.0 Default Gateway
development board serverip = 192.168.6.10 gareway = 192.168.0.1 ipaddr = 192.168.0.230

virtual machine for the net connection

pc can ping the virtual machine , the virtual machine ping nowhere Development Board

------ Solution ------------------------------------ --------
you are nat mode , right ? Into bridge mode .
------ Solution ---------------------------------------- ----
you make sure your board can ping the computer first .
In addition to your ip settings if there are problems . Through the communication network is not needed after the gateway , are you sure your setting is right ?
------ Solution ---------------------------------------- ----
"
my virtual machine ip: 192.168.1.11 mask 255.255.255.0 gateway 192.168.85.255
pc: 192.168.1.11, mask 255.255.255.0 Default Gateway
development board serverip = 192.168.6.10 gareway = 192.168.0.1 ipaddr = 192.168.0.230

"

your IP and mask and is obtained after IP network segment where , PC and virtual machine IP as whether you can ? your virtual machine data if you can find your IP gateway ( in a network should not it) ?
------ Solution ---------------------------------------- ----
your ip address settings have problems, you should use the three ip connected to the same network segment NET , PC and virtual machines , but not the same IP address .
------ Solution ---------------------------------------- ----
IP are set in the same segment more convenient , make sure the virtual machine to ping a host , and then verify that the host and the development board can PING pass . Virtual machine and Development Board should be able to pass up .
------ For reference only -------------------------------------- -
seeking help
------ For reference only ---------------------------------------
ah now set up, Thank you great God !